BOS 3640, Interactions Of Hazardous Materials

/in /by

Unit V Research Paper: Hazardous materials incident

For this assignment, write about a hazardous materials incident or an environmental health and safety (EHS) project that involves a material(s) with a hazard(s) that falls under the hazard classification that we have studied so far (water/air reactive, corrosive, or toxic). The incident or project could be one that you have researched or been involved with. Your essay must include the following:

·         Summary of the project or incident

·         Identification of the hazardous material(s) involved and hazardous classification

·         Discussion of chemical properties and interactions relevant to the incident/project,

·         Any short or long-term mitigation implemented, and

·         Conclusion (your professional opinion on the project/incident)

BOS 3640, Interactions of Hazardous Materials 3

 

Your response must be at least 400 words in length. You are required to use at least two references, including your textbook for your response. All sources used, including the textbook, must be referenced. Paraphrased and/or quoted materials must have accompanying citations in APA format

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Reflection Paper Anthropology

/in /by

2-3 pages, double spaced. 1″ margins, 11 or 12 pt font. You should also include a works cited section/bibliography, which does not count towards your page requirement.

“A” papers will synthesize course readings, lecture content, films (where relevant), class discussion and your own interpretations into a cohesive and well-argued paper.

Prompt (Complete all parts):

· Define Darwinian medicine, and explain how this approach frames health and wellness relative to more mainstream US-style biomedicine.

· Explain the discordance hypothesis and describe the primary ways our information age society differs from the Environment of Evolutionary Adaptedness (EEA).

· Choose a disease or condition, and using it as an example, describe the ways an evolutionary perspective may add to our understanding of that disease or condition’s causation, as well as to possible prevention/treatment approaches.

· What barriers might medical anthropologists face in attempting to integrate Darwinian medicine into existing US medical care systems?

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Topic: Fieldwork Assignment Sheet

/in /by

COMS 3500: Contemporary Issues in Comm + Media Theory Fall 2017 || Dr. Liam Cole Young

Fieldwork Assignment Sheet

The Fieldwork assignment invites you to go out in the world in seek of data, impressions, observations, photographs, sound recordings, drawings, maps or any other material that furthers your understanding of the hidden infrastructure of digital networks and logistical systems. In consultation with me or your TA, you will choose a specific site for fieldwork—this can be on campus or off, but must be a public place. Brainstorm sites that you typically take for granted, but which—like the port lands, loading bays, shipping containers, and warehouses we will discuss in the course’s second half—are essential to our systems of civic, commercial, and communicative life. Regarding content and form, keep in mind:

(1) Your chosen site must be a public place and you must remain a passive observer. You may collect notes, draw sketches, take appropriate photographs, and make sound records of the area. However, you must ensure your site is not one where any people you encounter have a reasonable expectation for privacy (e.g. do not observe a public change room or make sound recordings in a lecture hall while class is happening). The idea here is that you are scouting infrastructure, not people, so it should be very easy to follow these guidelines. If you have an idea for a site that would require access or permission for entrance, please talk to Dr. Young well in advance to discuss.

(2) Successful projects will require careful planning. Start thinking early and do some research. Where might communicative, logistical, other kinds of infrastructure be located? A few ideas to get you thinking: shopping malls, Industrial districts and/or ports, University campuses, waterways, public libraries, etc.

You will compile your findings in a written report to be submitted on or before Nov. 27. This piece of writing is expected to be more expansive and rigourous than the podcast assignment. It is to be not less than 2000 words and must engage with at least 7 scholarly sources (at least three of which need be external to the course). Superior reports will include notes, drawings, photographs, or sound recordings as appropriate (either in-text or as appendices). You need to show us evidence that you actually did the fieldwork and weave it into your report. The goal here is to ground ideas from readings and discussions with the ‘dirt’ of place, history, and labour. A good way to think about the assignment is that it has three steps:

1. Conduct research about logistics and infrastructure (starting with course texts and working your way to sources external to the course)

2. Choose a site that you think will help to you learn more 3. Gather data and observations from that site 4. Synthesize preliminary research with findings from fieldwork in a way that allows you to draw

conclusions and/or make an argument about the infrastructure of culture, communication and/or commerce

 

 

COMS 3500: Contemporary Issues in Comm + Media Theory Fall 2017 || Dr. Liam Cole Young

Fieldwork marking guide A-range: Exceptional. Your fieldwork assignment shows evidence of care, thought and planning. Your research site is well chosen and allows you to explore themes from the course. You’ve collected a trove of interesting impressions, observations and other data. You weave them together in your research brief in thoughtful and compelling ways. Your analysis of the experience is grounded in keywords and themes from the course. You use relevant sources and have done solid research into the topic. It is clear that you’ve used the assignment to push your thinking about digital media networks and culture into exciting new directions. Overall, the assignment shows evidence of considerable effort over an extended period of time and a high level of engagement with course themes. You’ve taken this very seriously and put your best foot forward. B-range: Average or slightly above. Your fieldwork assignment checks most of the boxes but does not move much beyond minimum requirements. Your site is fine but perhaps a bit obvious. You’ve collected some interesting impressions, observations and other data, and you try to weave them together in your research brief in thoughtful ways. But your analysis is overly reliant on a few concepts, applies ideas from the course in superficial ways, or doesn’t show evidence of much research. There are some good insights here, but you don’t explore them with enough depth or sophistication. Overall, the assignment shows evidence of some effort but feels rushed and/or underdeveloped. Your take on infrastructure and fieldwork relies on commonplace understandings, though there are flashes of creativity. You’ve taken this seriously enough to check the boxes, and that’s fine, but this had the potential to be much more than it was. C-range: Below average or poor. Your fieldwork does not meet minimum requirements, or just barely scrapes by. You’ve gathered some material, but your site is not particularly well chosen and one gets the feeling this was rushed at the very last minute. You have not conducted a minimum standard of research into the topic. There is virtually no evidence that you sought to explore course themes in a creative way. Overall, the assignment shows little evidence of care or attention. There’s enough here for us to grade, but it’s disorganized and unconnected to the course. It’s disappointing to see almost no evidence that you tried to think about the assignment in a serious or creative way. D-range: Unacceptable. You did not follow assignment instructions and have instead slapped something together seemingly at the last minute. It’s a mess, but you probably know that.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Drup Proposal To Treat Cancer

/in /by

Recent studies support the potential of a drug that is derived from the metal iridium to effectively treat cancer. This experimental drug, Drug ZL105, has not been tested for efficacy and toxicity. Imagine that you are the one responsible for approving or denying the use of this drug within the United States. Your job is to propose the testing that is needed for this drug to be determined as safe and effective for the treatment of cancer in humans.

In your research and discussion, you should address the questions below.

1. What model(s) will you use for testing (i.e., animal, cell cultures, computer simulations)? Explain the choice of model, and provide support for the reliability of the model. Discuss the pros and cons of your choice.

2. In determining the safety and effectiveness of the drug, would it be necessary to test efficacy, toxicity, and lethality? Explain what each of these tests are for and whether or not one or more of the tests are necessary for your determination.

3. Provide your thoughts on what information you hope to gather from your tests and whether or not the same protocol should be used for various categories of products such as drugs, cosmetics, and herbal medicines.

Your case study assignment should be three to four pages in length and utilize at least three reliable references. Use APA style guidelines in writing this assignment, following APA rules for formatting, quoting, paraphrasing, citing, and referencing.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Advanced Solid Waste Management

/in /by

need 4 pages

Unit VIII Scholarly Activity You are an engineer in a design, build, and operate construction firm. The firm has received four requests for proposals (RFPs) and can only respond to one of these. You have been asked to review the RFP from Washentaw County, Michigan, and write up a three-page executive summary for the marketing team. After reading all of the executive summaries, the marketing team will make a decision about which, if any, of the RFPs to respond to. The RFP from Washentaw County is located here: http://www.ewashtenaw.org/government/departments/finance/purchasing/online_bids/bid-status-previous-years/previousyear-assets/assets_2010/rfp6518.pdf Your executive summary should include the following items: an introduction that includes a detailed overview of the project scope; identification of the required information to be included into the company response to the RFP; your concerns about any of the obligations in the RFP; how any negotiations with Washentaw County could affect the decision (i.e.,What collaborative methods of problem MEE 5901, Advanced Solid Waste Management 3 solving could be used to solve the marketing team’s problem of choosing an RPF? How could these methods be applied to this situation?); and your justified recommendation to respond or to pass on this business opportunity. This should include a description of the leadership and management principles that factored into your decision. Also, as stated in the RFP, the criteria for making a decision will depend on the following three areas: price, collection and methodology, and responsiveness to the bid. While you cannot address the price issue, you can cover in your recommendation discussion the collection methodology and the level of detail that you would recommend when responding to the bid. Your response should be at least three pages in length. At a minimum, you should use information from your textbook to support your answer, but other academic resources may be used as well. Any resources used should by cited in accordance with APA guidelines. Format your response in APA style to include a title page, running head, and reference page.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Unit VII RP

/in /by

For this assignment, you are to read the case study on page 184 in Chapter 10. After reading this case, reflect on a situation that happened in your workplace that was similar in that an employee challenged an order and pointed to another document, such as a labor contract, rules and regulations, standard operating procedures (SOPs), or past practices, to state that he or she was not going to follow the order. You will need to look at this personnel matter from the standpoint of both the employee and the supervisor, and you will describe how long it took to resolve the matter in order to meet the requirements below. Summarize a situation surrounding personnel management issues. Evaluate the grievance process within your organization surrounding personnel management issues. Critique steps taken in the grievance process to resolve or attempt to resolve personnel management issues. Model recommendations and solutions surrounding the selected situation from the standpoint of the employee and supervisor. Remember, be mindful and respectful of those within your chosen situation by keeping specific names from being used. This assignment must be a minimum of three pages in length, not counting the title or reference pages. In addition to the textbook, at least one outsides source must be used to address the aforementioned requirements. Finally, you must follow APA formatting throughout the paper.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

In This Lab, You Will See The Time Progression Of Impacts Associated With Either Coal-Fired Or Nuclear Power Plants For Electricity Generation To Help You Write Up A Scientific Paper That Centers On The Following:

/in /by

Name:

Date:

Instructor’s Name:

Assignment: SCI203 Phase 4 Lab Report

Title: Analysis of Energy Sources

Instructions: You will write a 1-page lab report using the scientific method.

When your lab report is complete – submit it in the classroom.

Part I: Using the lab animation, fill in the data table below to gather your data, and use it to help you generate your hypothesis, outcomes, and analysis.

Energy Source Fuel (Coal)/Uranium Needed (tons) CO2 Emissions (tons) Sulfur Dioxide and Other Emissions (tons) Radioactivity mSv (millisievert) Solid Waste (tons) Accidents
Coal Q1            
Coal Q2            
Coal Q3            
Coal Q4            
Nuclear Q1            
Nuclear Q2            
Nuclear Q3            
Nuclear Q4            

Part II: Write a 1-page lab report using the following scientific method sections:

· Purpose

· State the purpose of the lab.

· Introduction

· This is an investigation of what is currently known about the question being asked. Use background information from credible references to write a short summary about concepts in the lab. List and cite references in APA style.

· Hypothesis/Predicted Outcome

· A hypothesis is an educated guess. Based on what you have learned and written about in the Introduction, state what you expect to be the results of the lab procedures.

· Methods

· Summarize the procedures that you used in the lab. The Methods section should also state clearly how data (numbers) were collected during the lab; this will be reported in the Results/Outcome section.

· Results/Outcome

· Provide here any results or data that were generated while doing the lab procedure.

· Discussion/Analysis

· In this section, state clearly whether you obtained the expected results. Also discuss the results and what you learned from this lab.

· Note: You can use the lab data to help you discuss the results and what you learned.

Provide references in APA format. This includes a reference list and in-text citations for references used in the Introduction section.

Give your paper a title, and identify each section as specified above. Although the hypothesis will be a 1-sentence answer, the other sections will need to be paragraphs to adequately explain your experiment.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

2 Pages Due Thursday Evening PST

/in /by

Instructions: OSHA’s personal protective equipment (PPE) standard requires employers to assess the workplace to determine if hazards are present, which may necessitate the use of PPE. Based on the assessment, appropriate PPE must be selected and provided to affected employees.
Using Subpart I Appendix B as a guide, develop a hazard assessment for your workplace or a workplace with which you are familiar. If you work in an office, or if you work in another non-hazardous location, develop an assessment for an imagined industrial shop such as woodworking or metalworking. Use the other sections of Subpart I to help determine the appropriate PPE for each hazard. You can also use online safety equipment catalogs to find examples of PPE that meet the OSHA requirements.
Your submission must be a minimum of two pages in length (double-spaced). Begin your case study with an engaging opening statement that connects the reader to the case study. References and citations in APA format should be provided to support the hazard determinations and PPE selection. The reference page does not count toward meeting the two-page minimum.
Click  Here to locate the Subpart I Appendix B.
https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10120
see attachment for case study template

Number of Pages: 2 Pages

Level: College

Format: APA

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Unit 8 Hygiene

/in /by

Unit VIII Research Paper

For the following research paper assignment, you have been asked to perform an evaluation of employee exposures at a small automobile parts manufacturing facility. The manufacturing processes include two metal presses, two machining stations, three welding stations, a small paint booth, and a shipping/receiving area. There are two employees working at each press, one person working at each machining station, one person working at each welding station, two people working in the paint booth, and four employees working in the shipping/receiving area.

One of the presses is a 2,000-ton press, and the other press is a 200-ton press. The 2,000-ton press is the greatest noise source for the facility. The machining area uses a metal working fluid. The safety data sheet (SDS) for the metal working fluid is attached here. All welding is performed on stainless steel. The painting booth uses a powder coating operation, but the employees use xylene and methyl ethyl ketone (MEK) to clean the parts prior to the powder coating operation. At the end of the shift, one of the employees uses 1,3 butadiene to clean the nozzles for the paint booth. The facility uses two electric forklifts to move materials between the production area and the storage warehouse and between the warehouse and the shipping area. All employees work an 8-hour shift.

Part 1:

Using the information on anticipation and control we studied in the textbook, identify the hazards that are present in the facility. In your discussion, explain why you chose the hazards, and describe whether you believe the hazards to be actual hazards or potential hazards (which require further evaluation). Describe the specific location(s) at the facility where the hazards are located, and determine how many employees are potentially at risk in those areas.

Your response for Part 1 should be at least one page in length.

Part 2: Using the information on evaluation that we studied in the textbook, summarize how you would measure the personal exposures to the hazards that you identified in Part 1. Use the Occupational Safety and Health Administration (OSHA)

website (https://www.osha.gov/dts/sltc/methods/toc.html) or the National Institute for Occupational Safety and Health (NIOSH) website (http://www.cdc.gov/niosh/docs/2003-154/default.html ) to select the specific sampling and analytical method that would work best to evaluate any chemical hazards you identified. Provide a summary of the sampling media you would use, include the sampling flow rate, discuss how long you would sample, and explain how you would calibrate the sampling train. Include a discussion about why you selected the specific sampling and analytical method.

Your response to Part 2 should be at least one page in length.

Part 3: Access the attached sampling results  here

. For each set of results, perform the following actions:

Calculate the 8-hour time weighted average (TWA) exposure.

Compare the results to the appropriate OSHA permissible exposure limit (PEL).

Determine which results exceed an established OSHA PEL.

Write a one-page summary of the sampling results; document the exposures that exceeded an OSHA PEL, and identify those areas that you believe will require the application of controls to reduce risk. Include your calculations, include a list of the OSHA PELs you compared the results to, and explain how you decided that an exposure exceeded an OSHA PEL.

Part 4:

Using OSHA’s hierarchy of controls, recommend the control methods that you believe would be the most effective for

reducing the risks associated with the exposures that exceeded the OSHA PEL above. Explain how you would implement

the controls and how you would evaluate the effectiveness of the controls. Also, discuss any interim control methods you would recommend for the facility.

This section should be at least one page in length.

Include a reference page and in-text citations for all sources you used in this project, including your textbook, using proper APA format.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Part #1 Annotated Bibliography Part #2create An Academic Poster Presentation -Powerpoint

/in /by

Part #1 Unit IVAnnotated Bibliography APA Formatting In Text Citations

For this assignment, you will choose a topic and research sources for your final project.

In Unit VIII of this course, you will be developing an academic poster using PowerPoint on one of the issues covered in this course. You may choose any of the issues covered in the course textbook. See Unit VIII Final Project for more details. BOS 3551, Use Six sources to support your final project topic.

Provide a one-paragraph summary of 3 articles and two-paragraph summary for 3 articles. APA rules for formatting, quoting, paraphrasing, citing, and listing of sources are to be followed.

Your annotated bibliography should be at least two pages in length and include a title page (not part of the page count requirement.

Part #2

Unit VIII Final Project See Project Template below:

Using the sources from your Unit IV Outline and the template provided below, create an academic poster presentation Environmental Issues 4 PowerPoint.

The poster should consist of a single PowerPoint slide. There should be at least 900 words of text in paragraph form on your poster, and you should include at least four images (e.g., graphic, photo, table).

Be sure to include headings (as indicated) and use appropriate spacing and fonts so that your poster communicates your message clearly.

Submit your completed template (Word document) and your completed poster (as a power point) for grading.

Unit VIII Final Project Template

TITLE:

BACKGROUND ON ISSUE:

DEFINITION OF PROBLEM:

POSSIBLE SOLUTIONS:

ONE SOLUTION:

CONCLUSION:

GRAPHICS (3):

BOS 3551 1

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!