Assume that you are at work and you have a need to access a web page on the Internet, a folder on another PC on your local area network (LAN), and a printer on the LAN. Using MS PowerPoint, design and draw a network to do this. HINT: see the figures in the textbook and on the lecture slides. As an example, I have started a drawing below that connects two PCs via a hub – thus, each PC have the capacity to share folders with each other. Use the types of components below (and/or others that you can think of). Label all components. Make sure that you think of all possible components (to include cables, NICs, communication media, etc.) for your network. Basically, your drawing should be fully complete so that if someone uses your drawing to build the network, they will not need to add any items beyond what you specify. Use as many PowerPoint slides as you need. Add your name to this first PowerPoint slide in the upper left corner. At the end of the presentation, add an additional PowerPoint slide. On this additional PowerPoint page, describe what each component in your drawing does (use 12 point font). Your network drawing does not have to be pretty, but it does need to be legible/understandable. Just labeled boxes and lines are fine – your drawings do not have to be as detailed as the ones below.

Internet (show as a labeled cloud)	DSL Modem
Cable Modem	Dial Up Modem
Television Cable	Hub
Fiber Optic Cable	Switch
Router	Client PC
Telephone Line	Wireless Hub
Wireless Ethernet Card	Network Interface Card
Ethernet Cable	PNA Card and Wire
Internet Service Provider	Coaxial Cable
Web Server	VPN (Virtual Private Network)
VAN (Value Added Network)	etc.

design and draw a network using ms powerpoint