Discussion+Analysis

Discussion: Employment Law (200-300words) This week’s discussion on the topic of employment law is a little different.  The idea is to watch an episode of the American version of The Office and identify a legal issue related to employment law (Title VII, sexual harassment, ADA, ADEA, etc).  I find The Office not only a very entertaining television program but also a source for legal issues that could arise in an employment setting.  Therefore when undertaking the assignment provide the fact pattern which you identified in the episode and then analyze the situation using the IRAC method which we have used for the discussions in this course.  The Office may still be in syndication on a few television channels and many of the episodes may be seen on NBC.com.  Additionally NetFlix and Amazon subscribers will find it in those platforms, “canistream.it” is a way to look for availability and most public libraries should have multiple seasons available.  I am sure that there are other ways to view the show as well.  In the first portion of your discussion provide the fact pattern to a degree that other students who may not be familiar with the scenario will be able to provide comments to your post.

Below is an example I put together from an episode of the show – this scenario would correspond to Chapter Twenty Two in our text, which we are not covering this term.  From the fact pattern I put together 2 IRAC analyses.  You only need to do 1.  I have seen every episode of The Office a number of times, so do not try and make something up, I will know.

THE OFFICE SCENARIO:  The workers in the warehouse of Dunder-Mifflin were considering forming a union.  Jan Levinson, an executive of the Dunder-Mifflin, a member of management, informed the employees, who were considering forming a union, that they should take into consideration what happened at another Dunder-Mifflin branch which formed a union.  That branch was shut down, implying that the employees all lost their jobs.

ISSUE (1):  What procedures must the employees follow to form a union?

RULE (1):  To form a union, organizers distribute authorization cards to the employees.  If a majority of the cards approve union representation, the employer may voluntarily certify the union.  Once a union is certified, the employer must bargain with the union regarding employment terms and conditions.

If the Employer does not voluntarily certify the union, union organizers can petition the NLRB for an election.  To authorize an election, a minimum of 30% of employees must support a union or an election on unionization and there must be an appropriate bargaining unit, consisting of employees that share a mutuality of interest.

APPLICATION/CONCLUSION (1):  If 50% or more of the warehouse workers state on their authorization cards that they want to be represented by a union, the organizer (let us say Darrel) may submit said results to Dunder-Mifflin for certification.  Dunder-Mifflin may choose to certify the union.

If Dunder-Mifflin does not recognize the authorization cards, then Darrel may petition the NLRB for an election.  If Darrel can demonstrate a minimum of 30% of the warehouse workers support a union and an appropriate bargaining union exists, the NLRB most likely will authorize an election.  Considering that the warehouse workers have a mutuality of interest:  they are all located in one location in Scranton, PA and their respective jobs are similar in nature, I believe the requirements for an NLRB election are met.  If a majority of the warehouse workers vote in favor, the union is certified and Dunder-Mifflin would be required to negotiate with the union rather than individual employees.

ISSUE (2):  Did Jan, as a member of management, commit an unfair labor practice by threatening the employees should they form a union?

RULE (2):  Considered unfair labor practices, under the NLRA, and deemed illegal activities, are employer’s actions that adversely affect the employees’ right to unionize and bargain collectively.  Though an employer may campaign against the formation of a union at its work place, an employer may not interfere with employees’ activities to form a union or threaten employees’ decision to join a union.

APPLICATION/CONCLUSION (2):  Pursuant to a case covered in the text a member of management informed employees forming a union that they (the employees) should read everything carefully before deciding to vote for a union and also told these same employees that the union does not always live up to its promises.  In that case, the court found the employer did not interfere or threaten the employees when deciding whether to have union representation.  In contrast, I feel that Jan’s actions go further than the aforementioned case.  In my opinion Jan’s comments that another branch shut down because the employees chose to form a union is a direct threat, implying that if the warehouse workers at Dunder-Mifflin, Scranton form a union their jobs will be eliminated, obviously impacting the warehouse workers economic well-being.  Therefore, I conclude that Jan, on behalf of the employer, committed an unfair labor practice whereby Darrel could file a complaint with the NLRB.

 

 

Article Analysis(150-200 words)

you will select an article from a business periodical which generally relates to this course and write a brief summary and analysis. When choosing articles for this weekly assignment, you should ask yourself “Would this article be interesting to a student in this course or to someone who is working as a business professional?”  This is an individual project.  Two points are deducted each day assignment is late.

Each article analysis assignment shall include four parts:

i. Title of the article, date of publication, and author (note: The Economist does not provide author’s names on articles) of the article that you selected;

ii. A paragraph(s) summarizing the content and context of the selected article;

iii. A paragraph (or more) of your reflections where you clearly and succinctly analyze the article, reflecting on its meaning as it relates to your coursework in this class and/or its usefulness for business professionals seeking to become legally-astute managers, entrepreneurs, government regulators, etc.  This analysis paragraph should include at least two references to the readings, resources, and/or discussions which are covered in the course; and,

iv. A link (URL) to the article

Recommended sources for your article:

· The Wall Street Journal (Links to an external site.)Links to an external site.

· The Economist (Links to an external site.)Links to an external site.

· Harvard Business Review (Links to an external site.)Links to an external site.

· The Financial Times (Links to an external site.)Links to an external site.

· National Public Radio U.S. News (Links to an external site.)Links to an external site.

· The New York Times (Links to an external site.)Links to an external site.

· The Washington Post (Links to an external site.)Links to an external site.

· The Guardian U.S. News (Links to an external site.)Links to an external site.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

My Cousin Vinny

CJ252: AMERICAN COURT SYSTEMS

Assignment 6: My Cousin Vinny: Trial Techniques and Procedures

FORMAT:

· Typed- 12pt font

· Running Header-

Last Name, First Name

CJ252: A6

· Title Document (save as)-

Last NameFirst NameCJ252A6

ASSIGNMENT:

1) Bill slips a can of tuna in his pocket and forgets to pay. Is this shoplifting? Please explain how mens rea, actus reus, and corpus delecti are involved in this assessment.

2) Stanley and Bill were interrogated at the police station. Both conceded they were advised of their rights. Name one possible 5th amendment issue with the interrogations.

3) Vinny is seen studying a book about Alabama Laws. His research will have to include both procedural and substantive law. Why does he have to study both types of law? What is the difference between procedural and substantive law?

4) Vinny visits Bill and Stanley in jail. What is this meeting called? Why is it important?

5) Lisa tells Vinny she doesn’t think he is cut out for this lawyering stuff. Do defense attorneys have to meet a certain level of competence?

6) Explain the following legal principles:

a. Competence

b. Due diligence

c. Communication

d. Confidentiality

7) Pretrial Steps

a. What crime are Bill and Stanley accused of?

b. What probable cause justified the arrests?

c. Explain “Initial Appearance”

d. Explain “Preliminary Hearing”

e. Explain “Grand Jury”

f. Explain “Arraignment”

8) What happened during the Arraignment of Bill and Stanley? What does Vinny plead for his clients? (Did you catch that the arraignment and the preliminary hearing were out of order, at least out of the order we discussed in class?)

9) Why is the case introduced as “The People of the State of Alabama” vs Bill and Stanley? Why is the victim not a party in the case?

10) Explain the discovery process.

a. What is discovery?

b. Why is it necessary?

11) Describe the part of the movie when Vinny claims he wants discovery (disclosure), but doesn’t know the process for it. How does he find about the discovery process?

12) The Prosecution askes the jury members “Can you participate in an endeavor in which the ultimate disposition might be execution?” What is this process called?

13) Explain the jury selection process.

14) Does trial proceed with a jury trial or a bench trial? Explain the difference.

15) What are the key points offered in the prosecution’s opening statement?

16) What are the key points offered in Vinny’s opening statement?

17) The Prosecution presents its case first and gets to present its witnesses first. When the Prosecution calls its witnesses they call them for Direct Examination.

a. What are the characteristics of Direct Examination?

18) Once the Prosecution calls a witness and goes through Direct Examination then Vinny, the Defense, gets to Cross-Examine the witness

a. What are the characteristics of Cross-Examination?

19) Summarize the following testimonies. What happened on the stand?

  Direct Examination Testimony Cross-Examination Testimony
Old Lady    
Fat Man    
“Redneck” Dude    
Deputy Sheriff    

20) What is impeachment?

21) Which of the prosecution’s witnesses were impeached? Explain.

22) What is an expert witness?

a. How are expert witnesses different from “regular” witnesses?

b. What do you have to demonstrate to present someone as an “expert”?

23) How does Lisa get introduced as an expert witness? What are Lisa’s qualifications for testifying?

24) What are the key points offered during Vinny’s last witness exchange (essentially, his closing statement)?

25) Were any jury instructions offered to the jury?

26) What was the ultimate verdict of the case in My Cousin Vinny?

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

low

Assignment 2 – Researching Federal Codes

 

Using the Internet do a web search to find the Federal Government internet site for “United States Code”. Write a brief report answering the following questions:

(1) How many different titles are listed?

(2) Title 11 covers which topic?

(3) Title 15 covers which topic?

(4) Title 26 covers which topic?

(5) 29 U.S.C. Chapter 7 covers what subject?

Format: Answer questions 1-5. Your answers should be typed on 1 page of paper with answers numbered 1-5. Print the first page of each Title and U.S.C. chapter (1 page each as PDF) mentioned in each question (1-5). Turn in your answers together with copies of the first page of each Title in the assignment questions in PDF format (5 pages total). (Titles 11, 15, 26, and 29 U.S.C. Chapter 7).

Turn in your answers in PDF Format and uploaded to the CANVAS site for the course.

Due Date: This assignment is due by 7:00pm, Thursday, May 23, 2019.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Week 5 Discussion Nature Experience Project

Go outdoors.  Find a place outside were you can be in nature, state, or local park, a city square with trees and gardens, and old cemetery, or even your own backyard. Be creative. For those of you who may think there is no nature whatsoever around you or you will not hae the opportunity to get out into nature, the podcast The Sound of a Snail:  A Patients’s Greatest Comfort will give you get a sense of creative ways to complete this assignment, particularly if you are living in a highly urbanized setting.

Observe:  Once you are outdoors, choose a comfortable spot where you can stand or sit quielty for a least and hour of uniterrupted solitude.  Turn off all electronic devices.  Quietly take in your surroundings.  What do you notice?  Use your senses of sight, hearing, smell, and feeling to take the world in.  Ge as still and quiet as you can.

Write:  Either while you are outdoors or as soon after your return as you can , set aside at least a half an hour of uninterrupted time to write about your nature experience.  It should include both what you directly experienced during your time outdoors and your feelings and reflections on the experience itself.  In our writing consider this question:  Are human beings a part of nature, or apart from it?

Create:  Choose a creative means of sharing your nature experience, and what you learned from it, with the class.  This could take the form of a series of photographs with captions, a poem, a song, a brief personal essay, a work of art, the design for a board game, a video of some kind, or any other creative avenue you can think of.  The work should be entirely your own product.

If your work is entirely visual or auditory (eg. fine art photgraphy, music, etc.  please include a brief statement of 100-200 words that (1) relate your work back to your original nature experience; and (2) relates your work to the question of whether you feel you are a part of nature or apart from it.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Industrial And Hazardous Waste Management

The steps in the lesson were accomplished by the required reading of an article describing laboratory adsorption tests for lead and zinc removal. The lesson used the article’s data combined with engineering principles to design a prototype lead treatment system, and a required article presented a novel method for reducing leather tanning waste.

For this assignment, prepare a PowerPoint presentation that assesses engineering principles applicable to industrial and hazardous waste management by evaluating steps for an adsorption system design using engineering principles and presenting engineering calculations for waste treatment.

Specifically address the following items in your PowerPoint presentation.

  • Provide a title and introduction.
  • Summarize the Durga, Ramesh, Rose, and Muralidharan Required Unit Resources article.
  • List the steps required for design of a prototype adsorption system.
  • From Required Unit Resources, use the Yusuff and Olateju article’s equation (7) for the Radke-Prausnitz isotherm to evaluate qe for a Ce lead concentration of 10 mg/L. Show your calculation.
  • Explain how your value of qe determined from the equation compares to the value in Yusuff and Olateju’s article exhibit 10a. Do you think there is an error in the equation? Explain.
  • In the unit lesson, if the prototype’s wastewater flow is 500 gpd instead of 100 gpd and the influent lead concentration is still 10 mg/L, what would be the lead inflow rate in units of grams per day? Show your calculation.
  • Provide a summary of your PowerPoint information.

Your PowerPoint presentation must be at least 15 slides in length with a title slide and reference slide (title and reference slides do not count toward the minimum slide count). You should utilize at least the two Required Unit Resources: the Durga et al. and the Yusuff and Olateju articles. Ensure you refer to the unit lesson as you are creating your PowerPoint presentation.

Please adhere to APA Style when creating citations and references for this assignment. Do not include slide notes in your presentation. Be sure to use fonts that are large enough to view from a distance. This includes any fonts within images that you use. Be sure to cite and reference all information and images.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Astronomy Lab

Name: ______________________ Collaborator(s): ______________________

Date: ______________________

The  Orbit  of  Mars

Big  Idea   Tycho Brahe made a number of observations of the positions of Mars during the latter part of the 16th century. Despite not having a telescope, Brahe was able to obtain the most accurate measurements of the positions of Mars of his time. His assistant, a young mathematician named Johannes Kepler, devised a method of triangulation to determine the orbit of Mars around the Sun.

In this experiment, you will:

• Recreate Kepler’s measurements using Tycho Brahe’s data; • Analyze the properties of Mars’ orbit, and; • Investigate a modern claim about Mars’ appearance in the night sky.

Setup   You will need:

• Ruler • Protractor • Compass • Pencil (tip: if you can use a colored pencil in addition to a regular pencil, that would be great) • Calculator (optional)

Part  I:  Brahe’s  data   Kepler knew from Brahe’s observations that the sidereal period of Mars is 687 days, so every 687 days, Mars would return to the same position among the fixed stars. He also knew that the Earth completes two orbits around the Sun in 730 days. That means by the time Mars completes one full orbit around the Sun, Earth will not quite have completed two full orbits. Below is a table of Brahe’s data, grouped into five pairs of dates, each 687 days apart:

Pair Date Pair (687 days apart) Heliocentric longitude of Earth Geocentric longitude of Mars

1 February 17, 1585 January 5, 1587

159° 23′ 115° 21′

135° 12′ 182° 08′

2 September 19, 1591 August 6, 1593

5° 47′ 323° 26′

284° 18′ 346° 56′

3 December 7, 1593 October 25, 1595

85° 53′ 41° 42′

3° 04′ 49° 42′

4 March 28, 1587 February 12, 1589

196° 50′ 153° 42′

168° 12′ 218° 48′

5 March 10, 1585 January 26, 1587

179° 41′ 136° 06′

131° 48′ 184° 42′

 

 

Name: ______________________ Collaborator(s): ______________________

Date: ______________________ Every Martian year (687 days) Mars returns to the same point in its orbit around the Sun, thus if we view Mars at these intervals we can, by triangulation, determine that point. You should follow the procedure below to get the first point, then repeat four more times to get the orbit.

Part  2:  Plot  the  orbit   Attached is a diagram of the Sun with the orbit of Earth drawn around it (the orbits of Mercury and Venus are drawn in as well, to help show their relative distances.) The dashed horizontal line indicates where the Sun would appear to an observer from Earth (on the opposite side of the Sun) on the March equinox (March 21). This position represents 0 degrees of heliocentric longitude.

1. With the protractor and Sun as the center, plot the heliocentric longitude of the Earth as a point on the Earth’s orbit as given in the table (159 degrees).

2. Now with the protractor and using the Earth as the center plot the geocentric position of Mars (135 degrees). You can use the horizontal lines to help make sure your protractor is lined up at 0 degrees longitude. Your drawing should be similar to Figure 1:

 

Figure 1

3. Now repeat for the Jan. 5th 1587 date. First mark the position of Earth from its heliocentric longitude, and from that point draw a line to the geocentric longitude of Mars. The point of intersection is the position that Mars had on these two dates. Draw a dot there to represent Mars. Label this as position P1. Your drawing should be similar to Figure 2:

 

Figure 2

 

 

Name: ______________________ Collaborator(s): ______________________

Date: ______________________

4. Repeat the above steps for the remaining four pairs of dates in the data table. Label the positions of Mars as P2, P3, P4, and P5.

Kepler chose the first two sets of data to represent aphelion and perihelion, respectively for Mars.

5. Draw a line from the first position for Mars (P1) to the second position for Mars (P2). This line should pass close to the Sun (if your line passes nowhere near the Sun, your measurements for the Earth and/or Mars were off and you’ll need to try again). This line is called the major axis of the orbit.

6. Measure the major axis in centimeters to the nearest millimeter (tenth of a cm) ______________cm.

7. Find the middle of the major axis by dividing the length of the major axis by 2. Mark the center of the major axis and label it “midpoint”.

8. Measure the distance from the midpoint of the major axis to either end of it in centimeters. This length is defined as the semimajor axis.___________cm. Label this length a.

Part  3:  Kepler’s  third  law   Let’s calculate the value of Mars’ semimajor axis in Astronomical Units (AU). An Astronomical Unit is defined as the distance from the Sun to the orbit of the Earth.

9. Find the scale for astronomical units on your graph by measuring the distance from the Sun to the Earth in centimeters to the nearest millimeter (tenth of a cm). Scale: 1 AU = ______________________ cm

10. Using your scale, calculate the semimajor axis of Mars in AU: _______________________ AU

 

11. Now calculate the semimajor axis of Mars in miles. 1AU is 93 million miles, so multiply your answer from step 10 by 93: _________________million miles

12. Express your answer in scientific notation: _________________ miles

Now that we know Mars’ semimajor axis in AU (a), we can use Kepler’s third law to calculate its orbital period around the Sun in years (P). Recall:

𝑎! = 𝑃!

…which means we can solve for the period P like this:

𝑃 =   𝑎!

13. Using the above formula, calculate the orbital period of Mars in years:

___________! =   ________𝑦𝑒𝑎𝑟𝑠

 

 

Name: ______________________ Collaborator(s): ______________________

Date: ______________________ Part  4:  Eccentricity   Kepler believed that the orbits of the planets were divinely constructed, and therefore must be perfectly circular. Using your compass, draw a circle centered on the Sun with a radius equal to your measurement of Mars’ semimajor axis in step 8.

14. Do the positions of Mars (P1, P2, etc.,) line up on your circle? ________________

Despite what Kepler wanted to believe, his data showed him that the orbits of Mars and the other planets were not circular, but elliptical with the Sun at one focus.

Eccentricity, e, is a number that tells us how elliptical an ellipse is. For example a perfectly circular orbit would have an eccentricity of zero and a flattened out orbit would have an eccentricity of 0.9. Eccentricities of all ellipses lie between 0 and up to, but not including 1.

To find the eccentricity follow this simple formula: The eccentricity equals the distance from the Sun to the midpoint (marked in step 7) divided by the length of the semimajor axis. You do not need to convert from centimeters to AU or miles before dividing.

15. 𝑒!”#!!!”#$% = _______________ / _____________ = ______________

Determine the accuracy of your measurement: The known eccentricity of Mars’ orbit is e = 0.09. How close is your value? Calculate the percent error in your result:

16. %  𝑒𝑟𝑟𝑜𝑟 = !”#$”  !!!”#$  ! !”#$”  !

𝑥  100 = !.!”!  ___________ !.!”

𝑥  100 =   _____________%

Part  5:  Mythbusting  Mars   A friend sends you the following email:

On August 27 at 00:30, lift up your eyes and look up at the night sky. On this night, the planet Mars will pass just 34.65 million miles from the earth. To the naked eye it will be twice the size of the full Moon! The next time Mars will be so close to the Earth as much as in 2287. Share the news with your friends, because no one living on this earth has ever seen this!

Using your plot of Mars’ orbit, what is the closest Mars and Earth could possibly get to one another (for this question, let’s assume that Earth’s orbit is perfectly circular) in miles? Express your answer in scientific notation.

17. Minimum distance between Earth and Mars _______________________ miles. Show your work:

18. Does Mars ever get to within 34.65  𝑥  10! miles of Earth? _____________

 

 

 

Name: ______________________ Collaborator(s): ______________________

Date: ______________________ Let’s investigate the claim that Mars will be twice the size of the full Moon at its closest approach.

On August 27, 2003, Mars made the closest approach to Earth in recorded history due to a near synchronization of Earth being at aphelion (furthest orbital point from the sun) and Mars being at perihelion (closest orbital point from the sun). The distance between the planets that day was a mere 55.8 million km.

Mars has a known diameter of 6790 km, which is about ½ the diameter of Earth, but still much larger than the Moon (3,475 km).

19. Let’s use the small angle formula to calculate the angular diameter, ∅  of Mars on this date. Express your answer in scientific notation:

∅!”#$%#&'($ = 206265 𝑑!”#$%&%’ 𝐷!”#$%&'(

= 206265 _____________________

_____________________

=   ______________________𝑎𝑟𝑐𝑠𝑒𝑐𝑜𝑛𝑑𝑠

Convert your answer in arcseconds to degrees. Recall that:

1  𝑑𝑒𝑔𝑟𝑒𝑒 = 60  𝑎𝑟𝑐  𝑚𝑖𝑛𝑢𝑡𝑒𝑠 = 3600  𝑠𝑒𝑐𝑜𝑛𝑑𝑠

 

 

20. Mars’ maximum angular diameter: ___________________________ degrees (use scientific notation)

21. The angular diameter of the full Moon is about ½ a degree in the sky. Does this value appear to

be larger or smaller than the full Moon? _________________

22. Given the email above, do you agree or disagree with the claim? Explain why or why not:

 

 

 

 

 

 

 

Name: ______________________ Collaborator(s): ______________________

Date: ______________________

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

36002- 2 Pgs Within 6 Hrs

36002 Topic: SCI 207 Our Dependence upon the Environment

Number of Pages: 2 (Double Spaced)

Number of sources: 3

Writing Style: APA

Type of document: Essay

Academic Level:Undergraduate

Category: Environmental Issues

Language Style: English (U.S.)

Order Instructions: Attached

Week 1 – Assignment 1

Stream Morphology Laboratory

[WLO: 1] [CLOs: 1, 3, 5]

This lab enables you to construct a physical scale model of a stream system to help you understand how streams and rivers shape the landscape, and how human actions can affect river ecosystems. This lab is done with materials that you will need to supply; the list of items you will need to obtain is in the Stream Morphology Investigation ManualPreview the document.

The Process:

Take the required photos and complete all parts of the assignment (calculations, data tables, etc.). On the “Lab Worksheet,” answer all of the questions in the “Lab Questions” section. Finally, transfer all of your answers and visual elements from the “Lab Worksheet” into the “Lab Report.” You will submit both the “Lab Report” and the “Lab Worksheet” to Waypoint.

The Assignment:

Make sure to complete all of the following items before submission:

Before you begin the assignment, read the Stream Morphology Investigation ManualPreview the document and review The Scientific Method presentation video.

Complete Activity 1 and Activity 2 using the materials that you supply. Photograph each activity following these instructions:

When taking lab photos, you need to include in each image a strip of paper with your name and the date clearly written on it.

Complete all parts of the Week 1 Lab WorksheetPreview the document and answer all of the questions in the “Lab Questions” section.

Transfer your responses to the lab questions and the data tables and your photos from the “Lab Worksheet” into the Lab Report TemplatePreview the document.

Submit your completed “Lab Report” and “Lab Worksheet” through Waypoint.

ENVIRONMENTAL SCIENCE

Stream Morphology

Investigation Manual

STREAM MORPHOLOGY

Table of Contents

2 Overview 2 Outcomes

2 Time Requirements

3 Background

9 Materials

10 Safety

10 Preparation 10 Activity 1

12 Activity 2

13 Submission

13 Disposal and Cleanup

14 Lab Worksheet

18 Lab Questions

Overview

Students will construct a physical scale model of a stream system to help understand how streams and rivers shape the solid earth (i.e., the landscape). Students will perform several experiments

to determine streamflow properties under different conditions. They will apply the scientific method, testing their own scenarios regarding human impacts on river systems.

Outcomes

• Design a stream table model to analyze the different characteristics of streamflow.

• Explain the effects of watersheds on the surrounding environment in terms of the biology, water quality, and economic importance of streams.

• Identify different stream features based on their geological formation due to erosion and deposition.

• Develop an experiment to test how human actions can modify stream morphology in ways that may, in turn, impact riparian ecosystems.

Time Requirements

Preparation ……………………………………………………………. 5 minutes, then let sit overnight Activity 1: Creating a Stream Table ………………………….. 60 minutes

Activity 2: Scientific Method: Modeling Human Impacts

on Stream Ecosystems……………………………. 45 minutes

Key

Personal project

e (PPE)

c

t

t

i

iv

v

e

equipment goggles g

follow photograph stopwatch

link to video

results and submit

required on flammable toxic environment health hazard

g

l

l

s

o

o

v

v

e

e

s

apron

Made ADA compliant by NetCentric Technologies using the CommonLook® software

warning co

o

o

r

rr

ro

o

s

s

i

i

2 Carolina Distance Learning

Background

A watershed is an area of land that drains

any form of precipitation into the earth’s water bodies (see Figure 1). The entire land area that forms this connection of atmospheric water to the water on Earth, whether it is rain flowing into a lake or snow soaking into the groundwater, is considered a watershed.

Water covers approximately 70% of the earth’s surface. However, about two-thirds of all water is impaired to some degree, with less than

1% being accessible, consumable freshwater. Keeping watersheds pristine is the leading method for providing clean drinking water to communities, and it is a high priority worldwide. However, with increased development and people flocking toward waterfront regions to live, downstream communities are becoming increasingly polluted every day.

From small streams to large rivers (hereafter considered “streams”), streamflow is a vital part of understanding the formation of water and landmasses within a watershed. Understanding the flow of a stream can help to determine when and how much water reaches other areas of a watershed. For example, one of the leading causes of pollution in most waterways across the United States is excessive nutrient and sediment overloading from runoff from

the landmasses surrounding these waterways. Nutrients such as phosphorus and nitrogen

are prevalent in fertilizers that wash off lawns and farms into surrounding sewer and water systems. This process can cause the overproduction of algae, which are further degraded

by bacteria. These bacteria then take up the surrounding oxygen for respiration and kill multiple plants and organisms. A comprehensive understanding of the interaction between streams and the land as they move downstream to other areas of a watershed can help prevent pollution. One example is to build a riparian buffer—a group of plants grown along parts of a stream bank that are able to trap pollutants and absorb excess nutrients; this lessens the effects of nutrient overloading in the streambed. (A riparian ecosystem is one that includes a stream and the life along its banks.)

Sediment, which is easily moved by bodies of water, has a negative effect on water quality. It can clog fish gills and cause suffocation, and the water quality can be impaired by becoming very cloudy because of high sediment flow. This can create problems for natural vegetation growth

by obstructing light and can prevent animals

continued on next page

Figure 1.

Precipitation

Snow

Rainfall

Overland flows

Underground sources

www.carolina.com/distancelearning 3

STREAM MORPHOLOGY

Background continued

from visibly finding their prey. Erosion also has considerable effects on stream health. Erosion, or the moving of material (soil, rock, or sand) from the earth to another location, is caused by actions such as physical and chemical weathering (see Figure 2). These processes loosen rocks and other materials and can move these sediments to other locations through bodies

of water. Once these particles reach their final destination, they are considered to be deposited. Deposition is also an important process because where the sediment particles end up can greatly impact the shape of the land and how water is distributed throughout the system (see Figure 2). Erosion and deposition can occur multiple times along the length of a stream and can vary because of extreme weather, such

as flooding or high wind. Over time, these two processes can completely reshape an area,

Figure 2.

causing the topography, or physical features, of an entire watershed to be altered. Depending on weather conditions, a streambed can be altered quite quickly. Faster moving water tends to erode more sediment than it deposits. Deposition usually occurs in slower moving water. With less force acting on the sediment, it falls out

of suspension and builds upon the bottom or sides of the streambed.

Sediments are deposited throughout the length of a stream as bars, generally in the middle of

a channel, or as floodplains, which are more ridgelike areas of land along the edges of the stream. Bars generally consist of gravel or sand-size particles, whereas floodplains are made of more fine-grained material. Deltas (see Figure

3) and alluvial fans (see Figure 4) are sediment deposits that occur because of flowing water

Figure 3.

Erosion Deposition

continued on next page

4 Carolina Distance Learning

Figure 4.

the water moving in the stream) are both vital to the shaping of streambeds. Within stream ecosystems, there are microhabitats (smaller habitats making up larger habitats) that have different discharges and velocities. The type

of microhabitat depends on the width of that part of the stream, the shape of the streambed, and many other physical factors. In areas that contain rifles, water quickly splashes over shallow, rocky areas, which are easily observed in sunny areas (see Figure 5). Deeper pools of slower moving water also form on the outside of the bends of the streams, as shown in Figure 5. Runs, which are deeper than rifles but have a moderate current, connect riffles and pools throughout the stream. The source of a stream and are considered more permanent structures because of their longevity. They are both fan-shaped accumulations of sediment that form when the stream shape changes. Deltas form in continuous, flowing water at the mouth of streams, whereas alluvial fans only form in streams that flow intermittently (when it rains or when the snow melts). Alluvial fans are usually composed of larger particles and will form in canyons and valleys as water accumulates in these regions. The fan shape of both deposits is easy to spot from a distance because they are formed due to the sand settling out on the bottom of the streams.

Streamflow Characteristics

Discharge, or the amount of water that flows past a given location of a stream (per second), is a very important characteristic of stream- flow. Discharge and velocity (the speed of

Figure 5.

Riffles Pool

continued on next page

www.carolina.com/distancelearning 5

STREAM MORPHOLOGY

Background continued

is where it begins, while the mouth of a stream is

where it discharges into a lake or an ocean.

The flow rate is very helpful for engineers and scientists who study the impacts of a stream on organisms, surrounding land, and even recreational uses such as boating and fishing. The speed of the water in specific areas helps to determine the composition of the substrate in that area of the streambed, i.e., whether the material is more clay, sand, mud, or gravel. Particle sizes of different sediments are shaped and deposited throughout various areas of a stream, depending on these factors.

Most streams have specific physical features that show periodicity or consistency in regular

intervals. Meanders can occur in a streambed because of gravity. Water erodes sediment to the outside of a stream and deposits sediment along the opposite bank, forming a natural weaving or “snaking” pattern. This pattern can form in any depth of water and along any type of terrain. Sinuosity is the measure of how curvy a stream is. This is a helpful measurement when determining the flow rates of streams because it can show how the curves affect the water velocity. In major rivers and very broad valleys, meanders can be separated from the main body of a river, leaving a U-shaped water body known as an oxbow lake (see Figure 6). These lake formations can become an entirely new ecosystem with food and shelter for some organisms, such as amphibians, to thrive in.

Figure 6.

Oxbow Lake Formation

continued on next page

6 Carolina Distance Learning

Another feature important for streamflow is the difference in elevation or the relief of a stream as it flows downstream. Streams start at a higher elevation than where they end up; this causes the discharge and velocity at the source versus that at the mouth of the stream to be quite different, depending on the meandering of the stream and the type of deposition and erosion that occurs. The gradient is another important factor of stream morphology. This

is a measure of the slope of the stream over

a particular distance (the relief over the total distance of the stream). For a kayaker who wants to know how fast he/she can paddle down a particular stream, knowing the difference in elevation (relief) is important over a particular area; however, knowing the slope of this particular area will give the kayaker a more accurate prediction. With erosion and deposition occur- ring at different rates and at different parts of the stream, knowing the gradient is a very important part of determining streamflow for the kayaker.

Groundwater is also affected by changes in

the stream shape and flow. Water infiltrates the ground in recharge zones. If streams are continuously flowing over these areas, the ground is able to stay saturated. Most streams are perennial, meaning they flow all year. However, a drought or an extreme weather event may lower the stream level. This can lower the groundwater level, which then allows the stream to only sustain flow when it rises to a level above the water table. With the small amount of available freshwater on Earth, it is vital that our groundwater sources stay pristine.

Biotic and Economic Impacts of Streams

Not only stream a major source of clean

freshwater for humans, but they are also a hotspot for diversity and life. There is great biotic variability between the different microhabitats (e.g., riffles, pools, and runs) of a stream. Riffles, in particular, have high biodiversity because of the constant movement of water and replenishment of oxygen throughout. Pools usually have fewer and more hardy organisms in their slower, deeper moving waters where less oxygen is available. There is also a multitude of plant

and animal species living around streams. From a stream in a backyard to the 1,500-mile-long Colorado River, streams have thousands of types of birds, insects, and plants that live near them because they are nutrient-rich with clean freshwater. Sometimes nutrient spiraling can occur in these streams. Nutrient spiraling is the periodic chemical cycling of nutrients throughout different depths of the streams. This process recycles nutrients and allows life to thrive at all depths and regions of different-size streams.

Streams can also have significant economic impacts on a region. Streams are a channel for fishing and transportation, two of the largest industries in the world. Because of all the commercial boating operations that occur worldwide in these channels, it is vital to understand the formation and flow patterns of streams so that they are clear and navigable. Fishing for human consumption is another large, worldwide industry that depends on stream health; keeping streams pristine and understanding how they form are of utmost importance in sustaining this top food industry. Recreational activities such

as kayaking, sportfishing, and boating all shape areas where streams and rivers are prevalent as

well.

www.carolina.com/distancelearning 7

continued on next page

STREAM MORPHOLOGY

Background continued

All acts that happen on land affect the water quality downstream. Through creating a model stream table in this lab, one can predict large, system-wide effects. Many land features and physical parts of a streambed can affect the flow of water within a watershed. Houses along a streambed or numerous large rocks can cause the streamflow to change directions. If any of these factors cause erosion or deposition in

an area of the stream, microhabitats can be created. These factors can affect the stream on a larger scale, creating changes in flow speeds and widths of the streambeds.

The Importance of Scaling and the Use of the Scientific Method

When a stream table model is created, a large- scale depiction of a streambed is being reduced to a smaller scale so that the effects of different stream properties on the surrounding environment can be demonstrated. While the stream table made in this lab is not a to-size stream and landscape, the same processes can be more easily observed at a scaled-down size. Scientists frequently create models to simplify complex processes for easier understanding. For example, to physically observe something that is too big, such as the distance between each planet in the solar system, the spatial distance can be scaled to create a solar system model. By changing the distance between each planet from kilometers to centimeters, this large system is now more feasibly observed. Similarly, the stream model allows us to physically view different scenarios of a streambed and analyze different stream properties. Mathematical equations are also used frequently to observe

data to predict future conditions, such as in meteorological models. Ultimately, models can be very important tools for predicting future events and analyzing processes that occur

in a system.

When one creates a model, many different outcomes for the same type of setup can be possible. In this case, multiple variations of similar-size streambeds will be designed to evaluate different stream features and their impacts on the surrounding ecosystem. When performing any type of scientific evaluation time

, the scientific method is very useful in obtaining accurate results. This method involves performing experiments and recording observations to answer a question of interest.

Although the exact step names and sequences sometimes vary a bit from source to source,

in general, the scientific method begins with

a scientist making observations about some phenomenon and then asking a question. Next, a scientist proposes a hypothesis—a “best guess” based upon available information as to what the answer to the question will be. The scientist then designs an experiment to test the hypothesis. Based on the experimental results, the scientist then either accepts the hypothesis (if it matches what happened) or rejects it (if it doesn’t). A rejected hypothesis is not a failure; it is helpful information that can point the way to

a new hypothesis and experiment. Finally, the scientist communicates the findings to the world through presenting at a peer-reviewed academic conference and/or publishing in a scholarly journal like Science or Nature, for example.

continued on next page

8 Carolina Distance Learning

When creating stream table models, we are trying to understand how different factors can affect streamflow. A few very important steps from the scientific method are required. The first is forming a testable hypothesis, or an educated prediction, of what you expect to observe

based on what you have learned about stream morphology thus far. In Activity 1, the steps are already listed, so the main goal is to compare the two differences in stream reliefs. However,

in Activity 2, the goal is to alter a different variable and predict what will happen to several stream features in this new situation. In general, when recording these observations to test a hypothesis, it is important to repeat the tests.

To obtain valid results, you need to have similar results over multiple attempts to ensure consis- tency in the findings and to show that what you are discovering is not by chance but is instead replicated each time the experiment is run. While multiple trials are not required in this lab experiment, if you feel particularly less than confident with your results from doing only one trial run in Activity 1 or 2, feel free to do multiple trials to test for validity.

Materials

Needed but not supplied:

• Tray or cookie sheet (or something similar)

• •

• •

• •

• •

• •

2–3 lb bag of sand or 1 lb bag (or more) of cornmeal

A single-use cup that can have a hole poked in it (e.g., plastic yogurt cup, foam cup)

A small piece of foam (such as from a foam cup), about the size of a grain of rice

Cup, such as glass, mug, or plastic cup Paper clip, skewer, or thumbtack (to poke a hole in the single-use cup)

2 books, one approximately twice as thick as the other

Ruler (There is a ruler in the Equipment Kit if you have already received it, or you can print one at a website such as printable-ruler.net.) Tap water

2 Plastic bags (to cover the books or objects you don’t want to get wet)

Stopwatch (or cell phone with a timer) Digital camera or mobile device capable of taking photos

A piece of string Marker

www.carolina.com/distancelearning 9

STREAM MORPHOLOGY ACTIVITY

Safety

Wear your safety goggles, gloves, and lab apron for the duration of this investigation.

ACTIVITY 1

A Creating a Stream Table

In this activity, you will be measuring different factors (see Step 5) for two different stream models: one where the streambed is tilted at a steeper angle and another where the streambed is tilted at a shallower one. Propose four separate hypotheses for which of the two streambed angles (steeper or shallower) will have the highest values for sinuosity, velocity, relief, and gradient. Briefly state why you feel that way. Complete this information in the “Hypotheses” section of the Lab Worksheet.

1. Bring the tray outside. Place the thicker book in a plastic bag. Place the tray on one end of the book so it is tilted (see Figure 7).

Figure 7. Tray Thicker book

2. Fill the cup without a hole in it with tap water and slowly pour the water into the single-use cup. Ensure that the single-use cup is right above the higher end of the tray.

Note: Store extra tap water on-site if more water is needed to form a stream.

3. Let the water trickle out of the hole in the single-use cup down the sand/cornmeal. Observe how the water forms a “stream” in the table. Stop pouring after small streamflow has formed down the table.

Poking a Hole in a Cup to Create a Stream

https://players.brightcove. net/17907428001/HJ2y9UNi_default/ index.html?videoId=5973740372001

continued on next page

Read all the instructions for these laboratory activities before beginning. Follow the instructions closely, and observe established laboratory safety practices, including the use of appropriate personal protective equipment (PPE).

Do not eat, drink, or chew gum while performing these activities. Wash your hands with soap and water before and after performing the activities. Clean the work area with soap and water after completing the investigation. Keep pets and children away from lab materials and equipment.

Preparation

1. Read through the activities.

2. Obtain all materials.

3. Pour the sand or cornmeal in one, even layer on the tray or cookie sheet.

4. Pour water slowly over the sand/cornmeal until it is completely saturated. Pour off any excess water outside.

5. With your hands, rub the sand/cornmeal so it is flat, and let it dry overnight in the tray/ cookie sheet.

6. Using the paper clip, skewer, or thumbtack, poke a hole in the side of the single-use cup, 1 cm up from the bottom of the cup.

10 Carolina Distance Learning

Note: This investigation is best performed outdoors or in an area in which it is easy to clean up wet sand/cornmeal and water. Do not dump any of the sand/cornmeal and water mixtures down the sink, because it can cause clogging.

4. On a separate sheet of paper, draw what the formed stream looks like.

Label where erosion and deposition occur along the streambed. Then take a photograph of your completed drawings of the stream to upload to the “Photographs” section of the Lab Worksheet.

5. Use the instructions below to calculate the values for the different physical stream features in the “Calculations” section of the Lab Worksheet. Record these values in Data Table 1 of the “Observations/Data Tables” section of the Lab Worksheet.

a. Sinuosity = curvy distance (cm)/straight distance (cm) (no units)

i. Use a piece of string to measure the distance from the mouth to the source

of the stream along the curve (curvy distance). Once you have used the string to trace the stream, hold each end of the string, straighten it, lay it flat, and mark where the two ends of the stream were. Use a ruler to measure this distance between the marks (the curvy distance).

ii. Use a ruler to measure the distance straight down the stream from the mouth to the source of the stream (no curve— straight distance).

iii. Now, divide the curvy distance by the straight distance. Note: If there is no curvy distance (if the stream forms straight down the table), then the sinuosity is 1.

How to Measure the Sinuosity of a Stream

https://players.bright- cove.net/17907428001/ HJ2y9UNi_default/index. html?videoId=5973736251001

b. Velocity = distance traveled (cm)/time to travel (s) (recorded in cm/s)

Obtain the small piece of foam (about

the size of a grain of rice). Hold the single-use cup over the raised edge of the stream table, allow water to flow out of the hole, and drop the piece of foam into the top of the stream. Time how long it takes (in seconds) for the piece of foam to float downstream. Divide the curvy distance by this time.

How to Measure the Velocity of a Stream

https://players.brightcove. net/17907428001/HJ2y9UNi_default/ index.html?videoId=5973739032001

c. Relief = highest elevation (cm) − lowest elevation (cm) (recorded in cm)

Measure the elevation change from the beginning to the end of the stream. Use the ruler to measure the highest point of the incline to the ground for the highest elevation and measure the bottom part of the tray to the ground for the lowest elevation.

How to Measure the Relief of a Stream

https://players.brightcove. net/17907428001/HJ2y9UNi_default/ index.html?videoId=5973740399001

d. Gradient = relief (cm)/total distance (cm) (rise/run) (no units)

Measure the slope of the stream; divide the relief by the total distance (calculated in Steps c and a). Note: If the stream is curvy, this distance is the curvy distance;

continued on next page

www.carolina.com/distancelearning 11

ACTIVITY

ACTIVITY 1 continued

if it is not, then this distance is the straight distance.

How to Measure the Gradient of a Stream

https://players.brightcove. net/17907428001/HJ2y9UNi_default/ index.html?videoId=5973742678001

6. Gently pour the excess water from the stream table into the grass, and flatten the sand/ cornmeal out where the stream formed, making a uniform layer.

7. Repeat Steps 1–6 with the thinner book to obtain a more gradual stream formation.

8. While not required, if you feel particularly less than confident with your results from doing only one trial run, feel free to do multiple trials to test for validity.

ACTIVITY 2

A Scientific Method: Modeling Human Impacts on Stream Ecosystems

Note: In Activity 1, the heights of the source of the streams were altered to observe how streamflow and streambed formation were affected. In Activity 2, use your streamflow knowledge to design an experiment by altering a different characteristic. You will record the same calculations for your new experimental setup.

1. Design a procedure similar to Activity 1. Choose one height to test the trials and change a different variable to analyze the same calculations for stream movement

and formation throughout the streambed. Choose a variable to change that models how humans might modify a stream channel for good or for ill. Activities such as pre-digging

a stream, adding a dam or other features along the streambed, or adding plants along these areas are all common factors that

can be altered within a streambed. Feel

free to implement additional materials from your surroundings, such as using a rock to represent a dam, for example.

2. Hypothesize whether each of the four calculations (sinuosity, velocity, relief, and gradient) will increase, decrease, or stay the same, and include your reasoning in your choices. Record this in the “Hypotheses” section in your Lab Worksheet.

continued on next page

12 Carolina Distance Learning

3. Test your new experimental design by using the same procedure as in

Activity 1. On a separate sheet of paper,

draw what the formed stream looks like. Label where erosion and deposition occur along the streambed. Then take a photograph of your completed drawings of the stream to upload to the “Photographs” section of the Lab Worksheet.

4. Calculate the values of the four different stream features in the “Calculations” section of the Lab Worksheet. Record your findings in Data Table 2 of the “Observations/Data Tables” section of the Lab Worksheet.

5. While not required, if you feel particularly less than confident with your results from doing only one trial run, feel free to do multiple trials to test for validity.

Submission

Submit the following two documents to Waypoint for grading:

• Completed Lab Worksheet

• Completed report (using the Lab Report

Template)

Disposal and Cleanup

1. Dispose of the sand/cornmeal mixture either in the environment or in the household trash. Dispose of any other materials in the household trash, or clean them for reuse.

2. Sanitize the workspace, and wash your hands thoroughly.

www.carolina.com/distancelearning 13

ACTIVITY

Lab Worksheet

Hypotheses

Activity 1.

Sinuosity hypothesis:

Activity 2.

Sinuosity hypothesis:

Velocity hypothesis:

Velocity hypothesis:

Relief hypothesis:

Relief hypothesis:

Gradient hypothesis:

Gradient hypothesis:

continued on next page

14 Carolina Distance Learning

Observations/Data Tables

Data Table 1.

Trial

Sinuosity

Velocity (cm/s)

Relief (cm)

Gradient

Thicker Book

1

2

3

Thinner Book

1

2

3

Data Table 2.

Variable changed: _________________________________________________________________________ Book thickness used: ______________________________________________________________________

Trial

Sinuosity

Velocity (cm/s)

Relief (cm)

Gradient

1

2

3

continued on next page

www.carolina.com/distancelearning 15

ACTIVITY

Lab Worksheet continued Calculations

Activity 1.

Sinuosity:

curvy distance (cm)/straight distance (cm) = sinuosity (no units)

___________ / ____________ =

Both the curvy and straight distances are measurements taken from the stream formation in the stream table. Please refer to Activity 1 for more details.

Velocity:

distance traveled (cm)/time it takes to travel (s) =

velocity (cm/s)

___________ / ____________ =

The distance a small piece of foam travels downstream divided by how long it takes to get downstream is the velocity. Refer to Activity 1 for more details.

Relief:

highest elevation (cm) – lowest elevation (cm) =

relief (cm)

___________ – ____________ =

Subtract the lowest elevation of the stream from the highest elevation of the stream to calculate the relief. Please refer to Activity 1 for more details.

Gradient:

relief (cm)/total distance (cm) = gradient (no units) ___________ / ____________ =

Divide the relief by the total distance of the stream to calculate the gradient. Please refer to Activity 1 for more details.

Activity 2.

Sinuosity:

curvy distance (cm)/straight distance (cm) = sinuosity (no units)

___________ / ____________ =

Both the curvy and straight distances are measurements taken from the stream formation in the stream table. Please refer to Activity 1 for more details.

Velocity:

distance traveled (cm)/time it takes to travel (s) =

velocity (cm/s)

___________ / ____________ =

The distance a small piece of foam travels downstream divided by how long it takes to get downstream is the velocity. Refer to Activity 1 for more details.

Relief:

highest elevation (cm) – lowest elevation (cm) =

relief (cm)

___________ – ____________ =

Subtract the lowest elevation of the stream from the highest elevation of the stream to calculate the relief. Please refer to Activity 1 for more details.

Gradient:

relief (cm)/total distance (cm) = gradient (no units) ___________ / ____________ =

Divide the relief by the total distance of the stream to calculate the gradient. Please refer to Activity 1 for more details.

continued on next page

16 Carolina Distance Learning

Photographs

Activity 1.

Activity 2.

www.carolina.com/distancelearning 17

ACTIVITY

Lab Questions

Please answer the following entirely in your own words and in complete sentences:

Introduction

1. Background—What is important to know

about the topic of this lab? Use at least one outside source (other than course materials) to answer this question. Cite the source using APA format. Answers should be 5–7 sentences in length.

2. Outcomes—What was the main purpose of this lab?

3. Hypotheses—What were your hypotheses for Activity 1? What were your hypotheses for Activity 2? Identify each hypothesis clearly, and explain your reasoning.

Materials and Methods

4. Using your own words, briefly describe

what materials and methods you used in each of the activities. Your answer should be sufficiently detailed so that someone reading it would be able to replicate what you did. Explain any measurements you made.

Discussion

5. Based upon the results of each activity,

explain whether you accepted or rejected your hypotheses and why.

6. What important information have you learned from this lab? Use at least one outside source (scholarly for full credit) to answer this question. Cite the source using APA format. Answers should be 5–7 sentences in length.

7. What challenges did you encounter when doing this lab? Name at least one.

8. Based upon your results in Activity 2, what next step(s) might a scientist take to explore how humans affect stream ecosystems?

Literature Cited

9. List the references you used to answer these

questions. (Use APA format, and alphabetize by the last name.)

Now copy and paste your answers into the Lab Report Template provided. Include the data tables and photographs. You may wish to make minor edits to enhance the flow of your resulting lab report.

18

Carolina Distance Learning

NOTES

www.carolina.com/distancelearning 19

Carolina Biological Supply Company

www.carolina.com • 800.334.5551

©2018 Carolina Biological Supply Company

CB781631812 ASH_V2.2

ENVIRONMENTAL SCIENCE Stream Morphology Investigation Manual

www.carolina.com/distancelearning 866.332.4478

PLEASE USE THE RESOURCES I AM GIVING BELOW:

Required Resources

Text

Bensel, T., & Turk, J. (2014). Contemporary environmental issues (2nd ed.). Retrieved from https://content.ashford.edu

Chapter 1: Ecosystems

Chapter 2: Human Population Dynamics

Chapter 4: Land Use Changes and Biodiversity Loss

Multimedia

Moovly. (2015, January 8). The ecological footprint explained (Links to an external site.)Links to an external site. [Video file]. Retrieved from https://youtu.be/fACkb2u1ULY

This video provides information about what ecological footprints are and why they are measured and will assist you in your Ecological Footprints discussion this week. This video has closed captioning and a transcript.

Accessibility Statement (Links to an external site.)Links to an external site.

Privacy Policy (Links to an external site.)Links to an external site.

Weekend Edition (Producers). (2010, August 28). ‘The sound of a snail’: A patient’s greatest comfort (Links to an external site.)Links to an external site. [Audio podcast]. Retrieved from https://www.npr.org/templates/story/story.php?storyId=129475625?storyId=129475625

This article provides information on how a nature experience can happen anywhere and despite overwhelming obstacles, and will assist you in completing your Nature Experience Project you will begin this week. The full project is due in Week 5. This podcast has a transcript.

Accessibility Statement does not exist.

Privacy Policy (Links to an external site.)Links to an external site.

Web Pages

Global Footprint Network. (n.d.). What is your ecological footprint? (Links to an external site.)Links to an external site. Retrieved from http://www.footprintcalculator.org/

This web page provides an interactive calculator for determining your resource consumption and is necessary for completing your Ecological Footprints discussion this week.

Accessibility Statement does not exist.

Privacy Policy (Links to an external site.)Links to an external site.

The United States Environmental Protection Agency. (n.d.). Carbon footprint calculator (Links to an external site.)Links to an external site.. Retrieved from https://www3.epa.gov/carbon-footprint-calculator/

This web page provides an interactive calculator for determining your greenhouse gas emissions and is necessary for completing the Ecological Footprints discussion this week.

Accessibility Statement (Links to an external site.)Links to an external site.

Privacy Policy (Links to an external site.)Links to an external site.

Website

Water footprint calculator (Links to an external site.)Links to an external site.. (https://www.watercalculator.org)

This website provides an interactive calculator for determining your water consumption and is necessary for completing your Ecological Footprints discussion this week.

Accessibility Statement does not exist.

Privacy Policy (Links to an external site.)Links to an external site.

Supplemental Material

Carolina Distance Learning. (n.d.). Stream morphology investigation manual [PDF]. Retrieved from https://ashford.instructure.com

This lab manual provides background information on stream morphology and will assist you in your Stream Morphology Laboratory assignment. This manual is available for download in your online classroom.

Recommended Resources

Article

Carrington, D. (2018, March 12). What is biodiversity, and why does it matter to us? (Links to an external site.)Links to an external site. The Guardian. Retrieved from https://www.theguardian.com/news/2018/mar/12/what-is-biodiversity-and-why-does-it-matter-to-us

This article from The Guardian provides information about our global biodiversity crisis and may assist you in completing the Sustainable Living Guide Contributions, Part One of Four: Sustaining Biodiversity and Ecosystems assignment.

Accessibility Statement (Links to an external site.)Links to an external site.

Privacy Policy (Links to an external site.)Links to an external site.

Multimedia

Biointeractive [HHMI Biointeractive]. (2015, April 8). Humans, biodiversity, and habitat loss – HHMI biointeractive video (Links to an external site.)Links to an external site. [Video file]. Retrieved from https://youtu.be/1drkFgHbcWY

This video provides information about biodiversity loss and how people are contributing to it, and may assist you in completing your Sustainable Living Guide Contributions, Part One of Four: Sustaining Biodiversity and Ecosystems assignment. This video has closed captioning and a transcript

Accessibility Statement (Links to an external site.)Links to an external site.

Privacy Policy (Links to an external site.)Links to an external site.

TED-Ed. (2015, April 20). Why is biodiversity so important? (Links to an external site.)Links to an external site. [Video file]. Retrieved from https://youtu.be/GK_vRtHJZu4

This video provides information about biodiversity and why it is important, and may assist you in completing your Sustainable Living Guide Contributions, Part One of Four: Sustaining Biodiversity and Ecosystems assignment. This video has closed captioning and a transcript.

Accessibility Statement (Links to an external site.)Links to an external site.

Privacy Policy (Links to an external site.)Links to an external site.

Web Page

GreenFacts. (n.d.). Biodiversity & human well-being (Links to an external site.)Links to an external site.. Retrieved from https://www.greenfacts.org/en/biodiversity/l-3/1-define-biodiversity.htm

This web page provides detailed information about global biodiversity issues and may assist you in completing the Sustainable Living Guide Contributions, Part One of Four: Sustaining Biodiversity and Ecosystems Assignment.

Accessibility Statement does not exist.

SCI207: Additional Lab Supplies Checklist

Week

Lab Title

Additional Supplies Needed (not in kit)

1

Stream Morphology

☐ Tray or cookie sheet (or something similar) ☐ 2–3 lb bag of sand or 1 lb bag (or more) of

cornmeal

☐ A single-use cup that can have a hole poked in it

(e.g., plastic yogurt cup, foam cup)

☐ Cup, such as glass, mug, or plastic cup ☐ Paper clip, skewer, or thumbtack (to poke a

hole in the single-use cup)

☐ 2 books, one approximately twice as thick as

the other

☐ Ruler (There is a ruler in the Equipment Kit if

you have already received it, or you can print

one at a website such as printable-ruler.net) ☐ Tap water

☐ 2 Plastic bags (to cover the books or objects you don’t want to get wet)

☐ Stopwatch (or cell phone with a timer) ☐ Camera (or cell phone capable of taking

photographs)

2

Properties of Soil: Agricultural and Water Availability Impacts

☐ Sheet of white paper ☐ 2 Soil samples

☐ Distilled water

☐ Tap water

☐ Liquid hand soap

☐ Scissors

☐ Stopwatch (or cell phone with a timer) ☐ Camera (or cell phone capable of taking

photographs)

3

Ground Water and Surface Water Interactions

☐ Water

☐Tape

☐ Plastic bowl/container

☐ Scissors

☐ Paper towels

☐ Stopwatch (or a cell phone with a timer) ☐ Camera (or cell phone capable of taking

photographs)

SCI207: Additional Lab Supplies Checklist

4

Greenhouse Gases and Sea Level Rise

☐ Blank white paper ☐ Water

☐ Printout of page 12 ☐ Freezer

☐ Salt, 3 Tsp

☐ Scissors

☐ Pencil

☐ 2 Coins (dimes or pennies) ☐ Timer

☐ Teaspoon

☐ Camera (or cell phone capable of taking

photographs)

5

Lab Worksheet

Hypotheses

Activity 1.

Sinuosity hypothesis

Velocity hypothesis:

Relief hypothesis:

Gradient hypothesis:

Activity 2.

Sinuosity hypothesis:

Velocity hypothesis:

Relief hypothesis:

Gradient hypothesis:

continued on next page

ACTIVITY

Lab Worksheet continued

Observations/Data Tables

Data Table 1.

Trial Sinuosity Velocity (cm/s) Relief (cm) Gradient (cm)

Thicker Book 1

2

3

Thinner Book 1

2

3

Data Table 2.

Variable changed: Book thickness used:

Trial Sinuosity Velocity (cm/s) Relief (cm) Gradient (cm)

1

2

3

continued on next page

Calculations

Activity 1. Sinuosity:

curvy distance (cm)/straight distance (cm) = sinuosity (no units)

Activity 2. Sinuosity:

curvy distance (cm)/straight distance (cm) = sinuosity (no units)

/ = / =

Both the curvy and straight distances are measurements taken from the stream formation in the stream table. Please refer to Activity 1 for more details.

Velocity:

distance traveled (cm)/time it takes to travel (s) = velocity (cm/s)

Both the curvy and straight distances are measurements taken from the stream formation in the stream table. Please refer to Activity 1 for more details.

Velocity:

distance traveled (cm)/time it takes to travel (s) = velocity (cm/s)

/ = / =

The distance a small piece of paper travels downstream divided by how long it takes to get downstream is the velocity. Refer to Activity 1 for more details.

Relief:

highest elevation (cm) – lowest elevation (cm) = relief (cm)

The distance a small piece of paper travels downstream divided by how long it takes to get downstream is the velocity. Refer to Activity 1 for more details.

Relief:

highest elevation (cm) – lowest elevation (cm) = relief (cm)

– = – =

Subtract the lowest elevation of the stream from the highest elevation of the stream to calculate the relief. Please refer to Activity 1 for more details.

Gradient:

relief (cm)/total distance (cm) = gradient (cm)

Subtract the lowest elevation of the stream from the highest elevation of the stream to calculate the relief. Please refer to Activity 1 for more details.

Gradient:

relief (cm)/total distance (cm) = gradient (cm)

/ = / =

Divide the relief by the total distance of the stream to calculate the gradient. Please refer to Activity 1 for more details.

Divide the relief by the total distance of the stream to calculate the gradient. Please refer to Activity 1 for more details.

continued on next page

ACTIVITY

Lab Worksheet continued

Photographs

Activity 1

Activity 2.

Lab Questions

Please answer the following entirely in your own words and in complete sentences: Introduction

1. Background—What is important to know about the topic of this lab? Use at least one outside source (other than course materials) to answer this question. Cite the source using APA format. Answers should be 5–7 sentences in length.

[Write your answers here]

2. Outcomes—What was the main purpose of this lab?

[Write your answers here]

3. Hypotheses—What were your hypotheses for Activity 1? What were your hypotheses for Activity 2? Identify each hypothesis clearly, and explain your reasoning.

[Write your answers here]

Materials and Methods

4. Using your own words, briefly describe what materials and methods you used in each of the activities. Your answer should be sufficiently detailed so that someone reading it would be able to replicate what you did. Explain any measurements you made.

[Write your answers here]

Discussion

5. Based upon the results of each activity, explain whether you accepted or rejected your hypotheses and why.

[Write your answers here]

6. What important information have you learned from this lab? Use at least one outside source (scholarly for full credit) to answer this question. Cite the source using APA format.

Answers should be 5–7 sentences in length.

[Write your answers here]

7. What challenges did you encounter when doing this lab? Name at least one.

[Write your answers here]

8. Based upon your results in Activity 2, what next step(s) might a scientist take to explore how humans affect stream ecosystems?

[Write your answers here]

Literature Cited

9. List the references you used to answer these questions. (Use APA format and alphabetize by the last name.)

[Write your answers here]

Name of Lab

Your Name

SCI 207: Our Dependence Upon the Environment

Instructor’s Name

Date

*This template will enable you to turn your lab question responses into a polished Lab Report. Simply copy paste your answers to the lab questions, as well as all data tables, graphs, and photographs, in the locations indicated. Before you submit your Lab Report, it is recommended that you run it through Turnitin, using the student folder, to ensure protection from accidental plagiarism. Please delete this purple text before submitting your report.

Name of Lab

Introduction

Copy and paste your response to Question One here.

Copy and paste your response to Question Two here.

Copy and paste your response to Question Three here.

Materials and Methods

Copy and paste your response to Question Four here.

Results

Copy and paste your completed Data Tables here.

Copy and paste any Graphs here. Include a numbered figure caption below it, in APA format.

Copy and paste your Photographs here, in the order, they were taken in the lab. Include numbered figure captions below them, in APA format.

Discussion

Copy and paste your response to Question Five here.

Copy and paste your response to Question Six here.

Copy and paste your response to Question Seven here.

Copy and paste your response to Question Eight here.

References

Copy and paste your response to Question Nine here.

Name of Lab

Your Name

SCI 207: Our Dependence Upon the Environment

Instructor’s Name

Date

*This template will enable you to turn your lab question responses into a polished Lab Report. Simply copy paste your answers to the lab questions, as well as all data tables, graphs, and photographs, in the locations indicated. Before you submit your Lab Report, it is recommended that you run it through Turnitin, using the student folder, to ensure protection from accidental plagiarism. Please delete this purple text before submitting your report.

Name of Lab

Introduction

Copy and paste your response to Question One here.

Copy and paste your response to Question Two here.

Copy and paste your response to Question Three here.

Materials and Methods

Copy and paste your response to Question Four here.

Results

Copy and paste your completed Data Tables here.

Copy and paste any Graphs here. Include a numbered figure caption below it, in APA format.

Copy and paste your Photographs here, in the order, they were taken in the lab. Include numbered figure captions below them, in APA format.

Discussion

Copy and paste your response to Question Five here.

Copy and paste your response to Question Six here.

Copy and paste your response to Question Seven here.

Copy and paste your response to Question Eight here.

References

Copy and paste your response to Question Nine here.

PLEASE FOLLOW THE INSTRUCTIONS AND ANY QUESTIONS PLEASE CONTACT ME AS SOON AS POSSIBLE

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

FEMA Certs – Wordy Whiz – Or ONLY Experienced Replies.

I have FEMA Certifications particular subjects listed below. If anyone is familiar with FEMA certifications, it HAS to have passing choices.

I will send the multiple choice word documents of each of the subjects listed below. Questions range from a minimum of 15 – 50 (very few) multiple choice questions. You can forward back to me as you complete until all is completed. Deadline is Feb. 12, 2015. All SERIOUS and EXPERIENCED APPLY.

IS – 10.a                   Animals in Disasters: Awareness and Preparedness

IS – 11.a                   Animals in Disasters:  Community Planning

IS – 103                    Geospatial Information Systems Specialist

IS – 111.a                 Livestock in Disasters

IS – 139                    Exercise Design

IS – 208.a                 State Disaster Management

 

IS – 235.b                 Emergency Planning

IS – 240.a                 Leadership and Influence

IS – 241.a  Decision Making and Problem Solving

– 244.a or 244.b    Developing and Managing Volunteers

 

IS – 288                    The Role of Voluntary Agencies in Emergency Management

IS – 301                    Radiological Emergency Response

IS – 302                    Modular Emergency Radiological Response Transportation Training

IS—315                    CERT Supplemental Training: The Incident Command System

 

IS – 331                    Introduction to Radiological Emergency Preparedness Exercise Evaluation

IS – 340                    Hazardous Materials Prevention

IS – 346                    An Orientation to Hazardous Materials for Medical Personnel

IS—360                    Preparing for Mass Casualty Incidents: A Guide for Schools, Higher Ed and Houses of Worship

 

IS – 386                    Introduction to Residential Coastal Construction

IS – 393 or 393.a      Introduction to Hazard Mitigation

IS – 394 or 394.a      Protecting Your Home or Small Business from Disaster

IS—523                    Resilient Accord – Exercising Continuity Plans for Cyber Incidents

IS – 613                    Technical Writing – (ENGLISH)

IS – 632.a                 Introduction to Debris Operations

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Unit VII Case Study (BOS 3640)

Unit VII Case Study For this assignment, you are the lead incident commander for a hazardous materials incident similar to those that have been introduced in this course. In this scenario, HLF Polyurethane Manufacturing was undergoing a maintenance activity in which an acid gas feed line segment required replacement. Pressure gauges were not installed in the line to monitor activity or to indicate if the line was operational. Upon initiating the line breaking activity (opening the line to the atmosphere) under self-contained breathing apparatus (SCBA), there was an uncontrolled release of acid gas. A nearby welding operation provided the ignition source and the flammable gas was ignited. The following actions were initially taken: The evacuation alarm was sounded and the facility emergency response team (ERT) was activated. The plant manager and the local fire department were notified of the incident. The incident command was established at the facility office near the main access gate to the south (this is the furthest distance within the property boundary from the incident location). The incident commander implemented actions required under the approved emergency response plan. The ERT was not able to immediately isolate the source of the incident. The fire department arrived on location and assumed the incident command of the event. Additional Relevant Information: The facility encompasses an area measuring 2000 feet by 1400 feet. The nearest residential community is located approximately 1000 feet to the northeast. A plastic recycling plant is located along the south fence boundary of the refinery. A major interstate highway runs directly parallel to the plant. The ambient temperature on the day of the incident was 85° F and the wind was blowing at 7 mph from the southwest to the northeast. Work crews were scheduled to work 12-hour shifts, 24-hours a day, to complete the incident response. The facility has a trained ERT that can respond to incidents. Your essay must address the following: Summarize the incident. Identify all hazardous materials involved, their classifications and their physical properties. Discuss chemical incompatibility and interactions relevant to this incident. Discuss any short or long term mitigation necessary. Explain how the lead incident commander should respond to this incident based on the Emergency Response Guidebook (ERG).

Click the link below to access the ERG at the Pipeline and Hazardous Materials Safety Administration OSH 3640, Interactions of Hazardous Materials 3 website: Pipeline and Hazardous Materials Safety Administration. (n.d.). Emergency Response Guidebook (ERG). Retrieved from http://www.phmsa.dot.gov/hazmat/library/erg Explain the corrective action plan that should be implemented based on the ERG to prevent a reoccurrence of this event. Your response must be at least one page in length (not counting the cover page or reference page). All sources used, including the text, must be referenced. Paraphrased and quoted materials must have accompanying in-text and reference citations in APA format. Your response must be at least one page in length (not counting the cover page or reference page). All sources used, including the text, must be referenced. Paraphrased and quoted materials must have accompanying in-text and reference citations in APA format.

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!

Discussion Board (Gen)

Please answer the following questions based on the article i posted called “Case study_Too Clean”.

QUESTION 1

Look at the figure that Amelia found in Wired pertaining to antibiotics and the microbiota. What conclusions can you draw from this figure?

QUESTION 2

Given the fact that Amelia found this article in an on-line pop-culture science magazine, do you believe the data presented? Do some research on the impact of antibiotics on the human microbiome using peer-reviewed literature. Summarize your findings from at least three articles in a short paragraph.

QUESTION 3

Based on the figure from Wired and on your research, do you think that antibiotics caused Amelia’s Crohn’s disease? Why or why not?

QUESTION 4

If a diverse gut microbiome is important for optimal health, what steps can you think of to protect and/or re-establish gut flora following an illness like food poisoning?

Answer the below questions based on the following youtube video link

https://www.youtube.com/watch?v=WL0YBKmcMJs

1) What is a normal relationship between humans and bacteria or microorganisms?

2)What purpose do bacteria or microorganisms serve us and what purpose do we serve them?

3) What did you learn that surprised you about the human-bacteria/microorganisms relationship?

 
Do you need a similar assignment done for you from scratch? Order now!
Use Discount Code "Newclient" for a 15% Discount!